Skip to main content Go to search Go to main navigation
Length
Range
Height
Item no. Length (mm) Width (mm) Height (mm) Colour Price SP Delivery time Quantity
2001.0111.0017 25000 75 0.65
CHF 72.65
for Piece

3–4 days

2001.0111.0018 25000 100 0.65
CHF 75.90
for Piece

3–4 days

2001.0111.0019 25000 150 0.65
CHF 129.70
for Piece

3–4 days

2001.0111.0020 25000 200 0.65
CHF 180.55
for Piece

3–4 days

No results found

Order the cut-to-size piece according to your specifications.

Frequently Asked Questions (FAQ)

The width is made up of the adhesive surface on the window frame, the joint (including a small loop) and the adhesive surface on the masonry. The wider the joint and the deeper the soffit, the wider the tape should be. If you’re unsure, please send us a sketch of the connection; we’ll be happy to advise you.
Yes. Thanks to its moisture-variable sd value, the tape acts as an airtight, vapour-retardant layer on the inside and as a driving-rain-proof, vapour-permeable layer on the outside.
No additional adhesive is required on masonry. For highly absorbent or cold, damp substrates, the manufacturer recommends a spray primer. If the substrate is unfamiliar, check the adhesion beforehand using a test piece.
Windows and masonry move slightly. The tape can withstand deformation of up to 30 % of its unadhered width. By creating a small loop between the frame and the masonry, you give it the necessary leeway to prevent it from tearing.
Yes, down to −10 °C. Warm the tape up to between +15 °C and +25 °C beforehand and ensure there is no ice or hoar frost on the surface. The tape reaches its full adhesive strength as soon as it is above 0 °C.
Yes, the tape can be plastered over and painted over. Ensure that the plaster in the soffit area is reinforced with mesh to prevent cracks from forming.
The tape is UV- and weather-resistant for 12 months. You should therefore plaster over or clad it as soon as possible after installation.
Multiply the circumference of the window by two if you are sealing both the inside and the outside, and add about 5 cm of extra length per window. A window measuring 1.2 × 1.5 m requires around 11 m of tape for both the inside and outside, so one 25 m roll is sufficient for two such windows.
24 months when stored in a dry place at room temperature and in its original packaging.
Yes. The tape is ift- and RAL-certified; its airtightness, resistance to driving rain, sd value and suitability for rendering have been tested by MPA Hannover, whilst emissions comply with EMICODE® EC1PLUS. We will be happy to send you the documentation on request.