NR/SBR rubber sheet with fabric reinforcement (70 Shore A)
Standard NR/SBR rubber sheet with cotton reinforcement (70 Shore A) – dimensionally stable and reinforced
The standard NR/SBR-based rubber sheet with cotton reinforcement is a cost-effective, fabric-reinforced all-purpose grade for large-area applications subject to mechanical stress. The embedded cotton fabric reinforcement—either single- or double-layered depending on the sheet thickness—gives the sheet significantly greater dimensional stability than rubber sheets without reinforcement: It prevents elongation or warping under tension, increases the tear strength of the composite and facilitates the installation of large areas as sheet material. With its good mechanical properties and its resistance to abrasion and impact, the sheet is particularly suitable as a general-purpose seal, as a covering for conveyor belts, as an impact and protective underlay, and for insulation.
All detailsGlossary
| Item no. | Length (mm) | Width (mm) | Height (mm) | Colour | Hardness | Execution | Price | SP | Delivery time | Quantity | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1201.1218.01.5 G | 15000 | 1400 | 1.5 |
|
70 | with lining |
CHF 6.70
CHF 140.70 /Stk.
per
m²
|
1–2 days |
21m²
|
||
| 1201.1218.02.0 G | 10000 | 1400 | 2 |
|
70 | with lining |
CHF 8.25
CHF 115.50 /Stk.
per
m²
|
1–2 days |
14m²
|
||
| 1220.1218.03.0 G | 10000 | 1400 | 3 |
|
70 | with two inserts |
CHF 12.35
CHF 172.90 /Stk.
per
m²
|
1–2 days |
14m²
|
||
| 1201.1218.03.0 G | 10000 | 1400 | 3 |
|
70 | with lining |
CHF 11.45
CHF 160.30 /Stk.
per
m²
|
1–2 days |
14m²
|
||
| 1220.1218.04.0 G | 10000 | 1400 | 4 |
|
70 | with two inserts |
CHF 16.95
CHF 237.30 /Stk.
per
m²
|
1–2 days |
14m²
|
||
| 1201.1218.04.0 G | 10000 | 1400 | 4 |
|
70 | with lining |
CHF 14.80
CHF 207.20 /Stk.
per
m²
|
3–4 days |
14m²
|
||
| 1220.1218.05.0 G | 10000 | 1400 | 5 |
|
70 | with two inserts |
CHF 19.10
CHF 267.40 /Stk.
per
m²
|
1–2 days |
14m²
|
||
| 1201.1218.05.0 G | 10000 | 1400 | 5 |
|
70 | with lining |
CHF 18.15
CHF 254.10 /Stk.
per
m²
|
1–2 days |
14m²
|
||
| 1220.1218.06.0 G | 10000 | 1400 | 6 |
|
70 | with two inserts |
CHF 22.45
CHF 314.30 /Stk.
per
m²
|
1–2 days |
14m²
|
||
| 1201.1218.06.0 G | 10000 | 1400 | 6 |
|
70 | with lining |
CHF 21.50
CHF 301.00 /Stk.
per
m²
|
3–4 days |
14m²
|
||
| 1220.1218.08.0 G | 10000 | 1400 | 8 |
|
70 | with two inserts |
CHF 29.00
CHF 406.00 /Stk.
per
m²
|
1–2 days |
14m²
|
||
| 1220.1218.10.0 G | 5000 | 1400 | 10 |
|
70 | with two inserts |
CHF 38.50
CHF 269.50 /Stk.
per
m²
|
1–2 days |
7m²
|
Order the cut-to-size piece according to your specifications.
The standard NR/SBR-based rubber sheet with cotton reinforcement is a cost-effective, fabric-reinforced all-purpose grade for large-area applications subject to mechanical stress. The embedded cotton fabric reinforcement – either single- or double-layered depending on the sheet thickness – gives the sheet significantly greater dimensional stability than rubber sheets without reinforcement: It prevents elongation or warping under tension, increases the tear strength of the composite and facilitates the installation of large areas as sheet material. With its good mechanical properties and its resistance to abrasion and impact, the sheet is particularly suitable as a general-purpose seal, as a covering for conveyor belts, as an impact and protective underlay, and for insulation.
Mechanically, the material offers a minimum tensile strength of 3 MPa (approximately 30 kg/cm²) with an elongation at break of at least 200 %. The operating temperature range is from –20 °C to +70 °C.
The intended application is crucial for selecting the correct material: this standard grade is designed for dry, mechanical applications and is not suitable for prolonged contact with oils, fuels, acids or solvents; its resistance to weathering and ageing is also limited. For high-abrasion applications, we recommend our natural rubber grade Vibra®Para; for weather- and chemical-resistant applications, our EPDM grade.
The sheet is available in thicknesses from 2 to 10 mm, in widths of 1.2 and 1.4 m, and as rolls with standard lengths of 10 m (5 m for certain thicknesses). Thinner sheets are reinforced with a single cotton insert, whilst thicker ones have two inserts. With a density of 1.5 g/cm³ and a black finish, the fabric-reinforced NR/SBR sheet can be cut to size and fabricated – as sheets and rolls, as well as in bespoke cuts.