LASTO®STRIP TS permanent plain bearing | LASTO®STRIP TS permanent plain bearing

The LASTO®STRIP PTFE permanent plain bearings type TS are high-quality structural bearings, which can absorb displacements due to their sliding properties. This type of bearing is recommended for the highest demands on the durability of the sliding ability. For example, it can be used in buildings without thermal insulation, which are permanently exposed to the full range of temperature movements. permanently. There are two design variants: the point bearing TSp for point loads and the line bearing TS for line loads. Both variants guarantee horizontal movements of up to ± 17.5 mm. These large movements, which occur during the entire service life of the structure, are ensured by the core specially coated with PTFE (Teflon), the grease lubrication and the matching sliding foil with very low frictional forces. The MPA Stuttgart confirms a sliding friction coefficient of μ = 0.03 based on friction tests carried out. For further information, please refer to the technical data sheets. Permanent plain bearing Movement capacity ±17.5 mm Installation height 7 mm Load range ≤ 760 kN/m